How to Build a Smok Pen
The Smok Pen is really a revolutionary vaporizing pen which allows for a write-to-write experience, even while you are away from home. This is due to the unique design of the pen. It has two tanks, one smaller compared to the other, that house the e juice and charged batteries. Once the user wants to write, he just places the pen in to the smaller tank and places the ink in the chamber where it will be vaporized. He simply turns on the pen and writes as though he is writing under a black mirror.
One of the biggest attributes of the Smok Pen is its ability to charge while it is on your own desk. It is because the coils on the Smok Pen are designed in a way to keep the e juice from dripping onto the table or anywhere else. This is due to the 0.3-ohm coil that’s placed inside the Smok Pen. The 0.3-ohm coil means that even the slightest of air currents won’t affect the writing process. Simply because the electronic circuitry has protection built in so that it will not be suffering from extremely low voltage electric currents.
The Smok Pen can be charged internally with a charger or via the USB connection that is included with it. Since the electronic circuitry includes a safety barrier built in, this means that there is no risk involved when charging the device through the computer. The Smok Pen has a charging capacity of sixteen 50 mah batteries, that is ideal for all pens that use one or two batteries.
In order to keep the Smok Pen working for an extended time period it is important you don’t overcharge the battery. Overcharging the battery will reduce the voltage that is available and may eventually bring about these devices malfunctioning. Overcharging the Smok Pen could also affect the vaporizing process. If you feel that your battery is not getting the vapor it will, remove the pen from the energy source and let it cool off for some minutes.
The fire button on the Smok Pen is situated in the bottom right corner of the device. The fire button comes with an orange light, which indicates that it is on. It is possible to press this button to activate the electronic heating element that will allow you to vaporize the oil. Once you have done so you can take away the coil from the holder and place it into the holder and place the Smok Pen in to the airflow chamber, that will cause the heating element to start heating up and burning off the wick.
Once the coil is removed from the holder the airflow chamber is ready for the sub-ohm cartridge. The coils are placed inside the holder plus they get heated from the airflow. After they get hot they begin to turn blue, which is the indication that it’s ready for the pen’s battery. Ensure that you place your sub-ohm in to the chamber before you push the fire button. If you do not put the coil in to the airflow chamber then your oil will leak and cause the leaking of e-juice.
Before you put the battery in to the pen, you must ensure that you have disconnected all the leads. Then you need to remove the Smok Pen’s cap and locate the leak or drip tip. You need to clean this with a small cotton bud, so that you could eliminate the leak. Then reattach the cap back to the Smok Pen and you also are ready to place the battery into the pen.
The final part of the construction process is the adapter plate, which fits into the Smok Vaporizer’s USB port. This plate lets you charge your e-juice through your computer, as long as you have an adapter Vape Pens for USB connection. I like this part as it allows me to charge my entire kit simultaneously without worrying about running out of power or constantly running out of e-juice.